Accutron Spaceview Repair & Restoration Services

ACCUTRON HOME | SITE MAP | Back to SERVICES MENU

SPACEVIEW REPAIR/RESTORATION PRICE LIST

SERVICE REQUEST FORM

Please Click Here For The Latest Schedule Information

I work on first edition 214's only. If need be, I will help you to verify that your Accutron is a caliber 214 before you send it.

The 214 is set from the rear of the case by lifting a spring loaded "C" shaped lever. Also on the rear of the case is a slotted hatch cover which unscrews to access the battery. If your Accutron does not have these features it is not a 214. Click on the thumbnail image (left) to see a larger photo.

Click on the thumbnails for larger images and then use your "back" button to return.

THE REPAIR PROCESS:

The process begins with removal of rust and/or corrosion (if any), and ultrasonic cleaning to remove caked on debris.

The back cover is dis-assembled, rust and/or corrosion (if any) is removed, and the parts are ultrasonically cleaned. A new gasket is installed in the battery hatch, and the cover is re-assembled.

The movement is taken apart. All metal parts are ultrasonically cleaned. The movement is then re-assembled lubricated, and adjusted. Finally, the dial and hands are installed. The assembly is then put back into its case, a new gasket is installed, and the cover is closed. The watch is then observed for approximately 2 weeks, during which time, fine adjustments can be made.

CAUTION: If you found an old Spaceview in a drawer and put a battery in it, you may be quite pleased to find that it runs, but may I suggest that you remove the battery immediately, and have the watch serviced before it self destructs. For an explanation please visit the Q & A Page

Is your Spaceview running way too fast? See the information at: http://www.accutron214.com/AccutronBattery.htm

SPACEVIEW REPAIR/RESTORATION PRICE LIST
Prices do not include replacements for damaged or missing parts.

FULLY INSURED - 1 YEAR GUARANTY

REQUIRED SERVICE CHARGES:

SPACEVIEW SERVICE & REPAIR
Non hacking: $150.00 plus parts
Hack models: $175 plus parts
(regulator diode may be required at additional cost)

INCLUDES:
Cleaning, lubrication, and adjustment of the movement. (most movements will work correctly with a readily available 1.5V battery)
Disassembly and cleaning of the case. (bezel, back cover, battery hatch, setting stem, and threaded lock ring)
Installation of replacement parts (if any)
Crystal polish (restores transparency and shine, does not remove scratches)
New 387S Energizer battery
New gaskets
New stainless steel spring pins for your band or bracelet
One year guarantee

DEPOSIT - ALL MODELS:
A deposit of $35.00 is required. The deposit will cover the cost of inspection and return shipping should you decide not to proceed with the repair & restoration. The deposit will be applied to the total if repair is authorized.

RECOMMENDED SERVICES:

COIL MODIFICATION:
Install regulator diode to reduce battery voltage to 1.3 volts: $50. (optional for most 214's) (required on over-active movements)

RESTORATION SERVICES:

SPACEVIEW CRYSTALS:
Sand, buff, & polish old crystal: $20.00 (removes all but the deepest scratches)
Reproduction Crystal: $75.00
New-Old-Stock Crystal: (Individually quoted if available)

STAINLESS STEEL BEZELS:
Buff stainless steel bezel: $75.00

GOLD & GOLD FILLED BEZELS:
Gently buffed & polished: $75.

REAR COVERS: **
Restore straight & circular graining on rear cover, setting stem, & battery hatch: $125.00

THREADED LOCK RINGS:
Buff stainless lock ring: $35.00

CHAPTER RINGS: *
Remove old luminous, clean and apply fresh high-glow luminous paint: $125.00

LUMINOUS HANDS: *
Rust Free: Clean, and apply fresh high-glow luminous paint: $75.00
Rusted: Clean, clear coat, and apply fresh luminous paint: $95.00

REPRODUCTION SPACEVIEW HANDS:
White luminous hand set: $75.00
Chapter Ring type (left)
Alpha type (right)

REPRODUCTION CHAPTER RINGS:
Silver luminous chapter rings: $125.00
R523 - 32.5mm (left)
R524 - 31.0mm (right)

METAL BRACELETS:
Ultrasonic cleaning: $10.00

PLEASE NOTE: Because each restoration project is unique, firm quotes can only be given after careful inspection.

* Ultra-bright, long lasting, long glowing Strontium Aluminate crystals

** Same as original factory finish. Removes or hides all but the deepest scratches

Spaceview Repair/Restoration Appointment Request

PRIVACY NOTICE: The information you send on this form will automatically create invoices and return shipping labels. No information will be made available to anyone else for any purpose whatsoever.

I work on the first edition 214 caliber Accutron only. Please compare your watch's back cover with the photo at right. If your Accutrons' back cover is similar it is a 214.

The best way to contact me is by e-mail. Please be advised that if you access my voice-mail and leave an e-mail address I will try to reply promptly but if you don't hear from me within one day it's probably because I didn't get your correct e-mail address and my message was returned as undeliverable. Due to the many incoming calls that I receive from people seeking information about their watches, I regret that I cannot return phone calls so please e-mail me by clicking the link below.

If you phone please spell out your e-mail address slowly, enunciate clearly, and indicate whether there are any special characters

Questions? Send eMail

EQUIPMENT

Click on the thumbnails for a larger image, then use your back button to return

WORK SPACES

Ultrasonic Cleaning