Accutron 214 Repair

ACCUTRON 214 REPAIR & RESTORATION SERVICES

FULLY INSURED - 1 YEAR GUARANTY
Parts and Labor

SPECIALIZING IN THE CLEANING, REPAIR AND RESTORATION
OF FIRST EDITION 214 CALIBER ACCUTRON TUNING FORK WATCHES.
ACCUTRON HOME | SITE MAP | Back to SERVICES MENU

Restoration process photo page: click here

214 REPAIR/RESTORATION PRICE LIST

Please Click Here For The Latest Schedule Information

I work on first edition 214 caliber Accutron tuning fork watches only. If need be, I will help you to verify that your Accutron is a 214 before you send it for repair.

The 214 is set from the rear of the case by lifting a spring loaded "C" shaped lever. Also on the rear of the case is a slotted hatch cover which unscrews to access the battery. If your Accutron does not have these features it is not a 214. Click on the thumbnail image (left) to see a larger photo.

THE REPAIR PROCESS:

Click on the thumbnails for larger images and then use your "back" button to return.

The process begins with removal of rust and/or corrosion (if any), and ultrasonic cleaning to remove caked on debris.

The back cover is dis-assembled, rust and/or corrosion (if any) is removed, and the parts are ultrasonically cleaned. A new gasket is installed in the battery hatch, and the cover is re-assembled.

The movement is taken apart. All metal parts are ultrasonically cleaned. The movement is then re-assembled lubricated, and adjusted. Finally, the dial and hands are installed on the movement. The assembly is then put back into its case, a new gasket is installed, and the cover is closed. The watch is then observed for approximately 2 weeks, during which time, fine adjustments can be made to the movement.

CAUTION: If you found an old Accutron in a drawer and put a battery in it, you may be quite pleased to find that it runs, but may I suggest that you remove the battery immediately, and have the watch serviced before it self destructs. For an explanation please visit the Q & A Page

Is your 214 running way too fast? See the information at: http://www.accutron214.com/AccutronBattery.htm

BASIC 214 (non hacking) REPAIR / RESTORATION PRICE LIST
Prices do not include replacements for damaged or missing parts.
FULLY INSURED - 1 YEAR GUARANTY

*REQUIRED SERVICE: $150.00 plus parts
Cleaning, lubrication, and adjustment of the movement to work correctly with a readily available 1.5V battery
Disassembly and cleaning of the case. (bezel, back cover, battery hatch, setting stem, and threaded lock ring)
Installation of replacement parts (if any)
Crystal polish (restores transparency and shine, does not remove scratches)
New 387S Energizer battery
New gaskets
New stainless steel spring pins for your band or bracelet
One year guarantee (parts and labor)
*Regulator diode may be required at additional cost

DEPOSIT - ALL MODELS:
A deposit of $50.00 is required. The deposit will cover the cost of inspection and return shipping should you decide not to proceed with the repair & restoration. The deposit will be applied to the total if repair is authorized.

OPTIONAL SERVICES

COIL MODIFICATION:
Install regulator diode to reduce battery voltage to 1.3 volts: $50. Optional for most 214's) (required on over-active movements

CRYSTALS:
Sand, buff, & polish old crystal: $20.00 (removes all but the deepest scratches)
New Generic Crystal; $20
New-Old-Stock Crystal; $45.00 and up

RESTORATION SERVICES

STAINLESS STEEL BEZELS:
Buff stainless steel bezel: $95.00

GOLD & GOLD FILLED BEZELS:
Gently buffed & polished: $75.

REAR COVERS: **
Restore straight & circular graining on rear cover, setting stem, & battery hatch. Buff stainless lock ring: $150.00

SETTING STEM & BATTERY HATCH:
Restore circular graining: $95.00

THREADED LOCK RINGS:
Buff stainless lock ring: $20.00

214 DIALS: *
Remove old luminous, clean dial and apply fresh high-glow luminous paint: $35.00

LUMINOUS HANDS: *
Rust Free: Clean, and apply fresh high-glow luminous paint: $75.00
Rusted: Clean, clear coat, and apply fresh luminous paint: $95.00

METAL BRACELETS:
Ultrasonic cleaning: $10.00

PLEASE NOTE: Because each restoration project is unique, firm quotes can only be given after careful inspection.

* Ultra-bright, long lasting, long glowing Strontium Aluminate crystals.
** Same as original factory finish. Removes or hides all but the deepest scratches.

CONTACT INFORMATION

Martin Marcus
5 Laurel Court
Marblehead, MA 01945 (781) 639-0442

e-mail: martin@accutron214.com

Site Map

Please be advised that I almost never get up from my microscope to answer the phone which seems to ring constantly, even on weekends. I do however, reply to my e-mail every evening, so that's the best way to contact me. Simply click on the link above.

For those of you who hate to type, feel free to call and leave a message on my answering machine, but don't forget to leave your e-mail address. Please spell out the address slowly, enunciate clearly, and indicate whether there are any special characters such as dashes, underscores, or capital letters.

I always try to reply to e-mail on the day in which it was received, so if you don't hear from me within one business day, it's probably because I didn't get your correct e-mail and my message was returned as undeliverable.

I regret that I simply don't have the time to return either phone calls, or e-mails from people who are just looking for information, or advise. There are just too many of you, and my first priority is to keep from falling behind on my repairs.

Questions? Send eMail

If you phone please spell out your e-mail address slowly, enunciate clearly,
and indicate whether there are spaces or capital letters.

WORK SPACES

Click on the thumbnails for a larger image, then use your back button to return

Ultrasonic Cleaning