08 Jan 2005

Comments

Hello, I have a 1970 Accutron "Deep Sea" dive4 watch. I am seeking a S.S. link bracelet with the big tuning fork emblem on the clasp. The attaching end should be 17-18mm. My email is consulting@seppro.com Regards, Rob

Date:

09 Jan 2005

Comments

I got a Bulova N5 Accutron water resistant 10kt rolled gold plated. Number on back is J061831. It's got dates on front with the time but can't find out anything about what it is worth and the history of it. My email is fishcatcher1000@yahoo.com Would really appreciate any information that you can help me with.

Date:

09 Jan 2005

Comments

I own a Accutron Railroad Approved watch. Is this hard to get a repair on and where do I get it repaired at all? I am Looking for someone Who will not give me the run around on repair and give my family airloom proper care and TLC. Sincerely Bill rock50scollector@prodigy.net Ps I do not see any of my watch look alikes on this web site. Why?

Date:

10 Jan 2005

Comments

hello im trying to find the history for 2 ladies bulova watches one has got bulova no. l1 and 868948 on the back the other has bulova l4 no.834861 on the back i also have a mans accutron bulova no5 no.j061831 on back trying to find what they are worth so i can find what i need to do for them the ladies only got one band with one but the mans got band and jewels on it your help will be greatly appreciated

Date:

11 Jan 2005

Comments

Blue Face Accuron: I have an N1 code Accutron with a stainless case and a blue (like medium, Slate or French blue). I have never seen another one like it, and I'm wondering if anyone else knows anything about it. The case has a horizontal surface that is highly polished, and outboard of that the sides are chamfered and brushed. The case has four distinct, curved sides, it is not round or oval. It has highly polished hands, a sweep second hand and a date. The hour markers (not numbers) are square with facets on the top surface. I would appreciate any information about it. Thanks.

Date:

25 Jan 2005

Comments

I have a 214 that has a slightly marred face...my question is for anyone....Is it more valuable with the original face, or should I consider a new one??? Help by posting your opinion...Charlie B.

Date:

26 Jan 2005

Comments

I am looking for a model 214, circa 1965. My father's watch was gold with a soft tone gold dial. I don't care if it works so long as the case and dial are in nice shape. This would replace a very important family heirloom that was stolen. Please contact me at wklintworth@mortgagenorth.com Thank you. Bill Klintworth

Date:

27 Jan 2005

Comments

I was wondering if there was a standard accutron sound or does it vary from case to case? I have recently purchased a watch with a 218 movement, and the hum from the case sounds like it is about an "f" above middle c (on my piano)which it would seeing as that the fork is vibrating at 360 Hz (that F is 349 Hz and the F# is 369 Hz), but there seems to be another higher harmonic. Has anyone recorded any .wav or .mp3 files of running accutrons and posted them on the web? I would love to hear them if they have. Thanks, Nick. busharse@hotmail.com

Date:

02 Feb 2005

Comments

I have a Bulova Accutron Model 214 Tuning Fork Wristwatche in perfect working order. Can you tell me the current value. martinj2@lee.army.mil

Date:

05 Feb 2005

Comments

I have just recently come across a gold pocket watch with a chain and locket attached. The watch is 18k made by tiffany of new york and i have a serial number on it. The serial number is 112740. Is there anyone that can help me? I have looked all over the internet and havent come up with anything substantial. My email is robbdogg_ie@comcast.net. Hope someone can help thanks Rob

Date:

05 Feb 2005

Comments

I have a Bulova Accutron wrist watch that I received as a gift, circa 1980/1981. It has a stainless steel case, and the dial is red and black (does not have date indicator). The numbers (12,1,2,3 etc.) on the dial are silver. What appears to be a serial number on the back of the watch is T0144442. In this regard, my question is, when was this watch actually manufactured and does it seem as though the back case was changed possibly when I had taken the watch in for service over-the-years? Thank you, John

Date:

08 Feb 2005

Comments

I recently came across an Accutron dated N9, with an automatic movement. It has the day and date at 6, both quickset. The movement looks to be of very good quality, the rotor is set with ball bearings and has the numbers 1233.11 on it. It looks better than your average Bulova auto movement. The Accutron symbol is on the watch face at 12 and also on the bracelet clasp. Has a very fast beat. Did Bulova make this movement or was it made by another factory? I've never seen this before. Thank you, you can email me at micelikeme@yahoo.com.

Date:

12 Feb 2005

Comments

Hello, today I purchased an accutron watch, which apparently was given to a Fedex driver, as it says Fedex Safe Driver, on the face. On the back it says; 18 base metal bezel, stainless steel back, water resistant, bulova quartz. That is about all I see. Can you offer any further information? Thank you, Dennis.

Date:

16 Feb 2005

Comments

Hi, I have a accutron with a serial number of F397993. It has a crystal that is cut or beveled to look like squares. Can anyone tell me the model and or value? I do not know if it runs or not, it came from an estate about 4 years ago. Wal Mart did not have a battery to fit it. Thanks please answer by email. morkes@pldi.net

Date:

16 Feb 2005

Comments

I have an ACCUTRON that my wife gave me about 1972! It has ss case with a conventional screw off back and i need a new battery! I would like to get a new battery and put the watch in operation! sure appreciate finding where i can buy one! Dick Bratton RBRATTON1@AOL.COM

Date:

20 Feb 2005

Comments

I have an M4 accutron astronaut. Sure would like to find the correct band or a good copy. Thanks! vicnvining@bright.net.

Date:

23 Feb 2005

Comments

hello, i just saw the message about the federal express safe driver watch. I too have one and have had it for many years. can you tell me about it? new2newark@cs.com

Date:

26 Feb 2005

Comments

I have a Accutron watch that was purchased approximately 30 years ago. I do not have the name of the style, but it is gold in color and the face of the watch shows the inside works of the watch. I know they were real popular thirty years ago, I worked at a jewelry store in Milwaukee, WI, and that is where I purchsed it. On the back of the watch, the only markings on the watch are as follows. 18KT HEAVY GOLD ELECTROPLATE BEZEL STAINLESS STEEL BACK If you could send my any information on this watch, and if there is any value on the watch, please let me know. My e-mail is TracyCreek1009@netscape.net My Name is Jane Hartman Thank you very much

Date:

28 Feb 2005

Comments

I have an bulova accutron watch from the late 60s early 70s I am trying to find info on. It is 10k gold. square body with a round crystal. No date. The thin gold metal band comes from inside the case. The stem is lacated at the 5 o'clock position. The serial number is H381609. It has the tuning fork logo. I am trying to replace the band and restore the watch. Any help would be appreciated. bobbyndallas@msn.com

Date:

01 Mar 2005

Comments

My Spaceview has (I think) the original crystal - however, the tuning fork logo is on the left side of the crystal, not at the 12:00 like all the reproduction ones seem to. Is there an explanation? - Scooter

Date:

05 Mar 2005

Comments

Hello, I recently aquired an Accutron Diver's watch. It dates back to the 70s I believe. It has a black dial, black anodized case and a depth guage built into the bezel. Does anyone know where I could find information about this watch, i.e. model, operation, service, literature, etc? Thanks!

Date:

20 Mar 2005

Comments

Hello,I have a NO spaceview watch.The watch will run great until I put it on my wrist.After 5 min. it stops.It still hums sometimes even though the hands aren't moving.Case,dial movement are very clean.I purchsaed it for 35.00.What a steal of a deal!.Any suggestions????

Date:

21 Mar 2005

Comments

My original watch had the pale green markings and hands as described by another party who referred to it as an "asronaut" watch. My crystal and hands were replaced a couple of times over the almost 40 years I've owned it. In fact, I purchased a couple of extra crystals and sets of hands to be safe. However none of the replacements were the same as the originals!! :( My crystals have white markings and the hands appear to be (plain) stainless steel. Are real original hands and crytals available anywhere??? michaelg@gray.mb.ca

Date:

21 Mar 2005

Comments

My wife has a ladies Accutron watch. Unfortunately, our jeweler says they can no longer obtain the necessary battery. I went through this with my spaceview but someone suggested a slightly higher voltage battery which has worked fin for several years. Is there a similar replacement battery for our ladies Accutron??? Michaelg@gray.mb.ca

http://www.accutron214.com/AccutronBattery.htm

Date:

24 Mar 2005

Comments

I bought a Accutron watch from a reputable retail store in Boston some years ago and when I try to look up the model and year for it I don't seem to have much luck. Any help or direction anyone could give me would be much appreciated. The watch is two tone silver and gold the face is white with the tuning fork logo at twelve oclock it has a date window at three oclock with gold columns at the hour and double columns at six and nine oclock. The face iswhite with a subtle almost check pattern to it. the bracelet has a hidden clasp and the links form a silver tuning fork with a gold link between the forks. On the clasp it is written on one side swiss and the other stainless steel. the back reads, from twelve oclock, accutron T5 stainless steel case 588541 water resistent. The case is relatively thin and has a gold rim over the stainless with accents at the 3,6,9 and 12 positions.Acutron is written below the tuning fork on the face. Any idea what model and year this might be? Thank you, Jim Gyrine68@yahoo.com

Date:

26 Mar 2005

Comments

I have a white-dial Bulova Accutron Quartz watch. On the face, one finds the foregoing information plus the designation "666 feet" and "dual-day" under the day and date. On the back, you have "Bulova N7 Stainless steel case Water resistant 666 feet." It appears to have a rotating bezel that is red in color from the 1-15 minute area, with the remainder being black in color. The second hand is orange in color. Also, on the bottom edge of the front dial you find "T SWISS T". Can anyone tell me anything about this watch, i.e., name, model, age, et cetera? Thanks. My email is vanofam@setel.com.

Date:

28 Mar 2005

Comments

I have an old bulova accutron RR218-0 (not sure what it means) and also instead of a 12, there's a 0. Does this mean anything? Any information would be great. Email dawne.howard@shaw.ca

Date:

01 Apr 2005

Comments

I have a black Accutron Quartz Deep Sea 666 ft day date watch and I need a crown. Please contact me at jckelly@chartermi.net

Date:

05 Apr 2005

Comments

Hello, i have recently come into posession of a bulova astronaut mark II. I was wondering what this watch might be worth, i have no intention of selling it but was curious non the less. the watch is in full working order. could anyone advise me. thank you Richard

Date:

11 Apr 2005

Comments

Hello! I have two 218's and was wondering if the crown should be pulled out while they are not being worn to save on wear and tear to the mechanical side of the movement? Thanks!

Date:

12 Apr 2005

Comments

My father bought my mom a ladies' Bulova watch (diamond on each side) in the late 40's or early 50's. My mom at 86 yrs of age (1984). Ever since then her watch has been in a safety box. Last month, my daughter and I was going through her possessions and was looking at her watch. My daughter wound it and to our surprise, it began running. We watched it for a day or so, kept it wound, and decided to take into the jeweler to see if it was worth cleaning. They, as much as we, were amazed that it was still in great working order. So, for $30, the jeweler cleaned the watch, I purchased a band and am now wearing it...it's keeping great time and it seems so right to have it on my wrist. Hopefully, my daughter, a professor and registrar, will also wear this watch. It certainly has lasted three generations. Amazing! Ruth Fidelman c/o josephfidelman@yahoo.com

Date:

16 Apr 2005

Comments

Hi I was wondering if you had a collet adjusting tool for the Accutron. I am asking around hoping to find one. It seems that I need this tool to rotate the index finger out of the way and to perform certain adjustments.—If you have one for sale or know of anyone who has one or even point me in the right direction I would appreciate it very much.. I am a beginner and I want to start out with the right tools –so if you can help –Thanks STEVE  saferretti@sbcglobal.net

Date:

17 Apr 2005

Comments

Could you tell me what kind of strap would have been originally fitted to a 1966 (M6) 214 Railroad Approved? Thank you.

Date:

18 Apr 2005

Comments

What can you tell me about a m6 chapter ring spaceview, did this watch originally have a 387 battery is this watch worth 585.00.

Date:

27 Apr 2005

Comments

I have a Accutron...14k gold filled case....serial number J142689 NY....what model is it and when was it made? Thanks, Nick

Date:

28 Apr 2005

Comments

Hello, My father recently showed me his Bulova Accutron watch that was givin to him by his Uncle many years ago. He took it to a repair shop where the lady informed him that it was of value. On the back is STAIN ST, NG, BASE METAL BEZEL, F566146. On the face is BULOVA ACCUTRON, RAILROAD APPROVED. The band is missing and the face glass is broke with half missing. If I could get any information, I would be grateful. Thank You, Debbie M. claymoser@gorge.net

Date:

01 May 2005

Comments

My Father-in-law gave me an old accutron watch of his. It appears to be a 1970 (N0) 214 Chapter Ring Spaceview, but is a little unlike others I have been able to research on the web. It runs fine and appears to be dead-on accurate gaining perhaps a few seconds/month. It appears to match closest the 1271-AYS model on your Spaceview crystal page. The gold metal, accutron logo'd band is original according to my father-in-law and is a tight mesh style unlike others I have seen. The watch back has the 214 feature set except unlike most others, the words waterproof do not appear anywhere. It also says on the back "10KT GOLD FILLED BEZEL". On the Beveled edge of the back, it has "BULOVA" at top dead center, "PATENTED" at left side and "STAINLESS STEEL" at the bottom. The right side bevel is interrupted by the battery cover. The chapter ring is concave and has a luminous dot at the 12 o-clock position and a luminous stripe at each of the other 11 number positions with a black line at each of the 4 intermediate minute markings. One last difference from others I have seen is the sweep second hand. It appears painted white like the outer edges of the spear type hour and minute hands, but the opposite side includes the accutron tuning fork logo instead of being a simple straight edge. The watch case is 34mm diameter and the crystal appears to measure 31mm. I love the watch and intend to keep it maintained and in use, but would like to know a bit more of its history and confirm its lineage. Thanks - Dubini@bellsouth.net

Date:

03 May 2005

Comments

I recently inherited a gold filled accutron from my father that I know nothing about. It is not running and without band. I have a serial number of J972299. Does anyone have a clue about this watch? Fredwilson05@hotmail.com. thanx, Fred

Date:

13 May 2005

Comments

Does any1 know where you can purchase coffin links(steel colored) for an accutron astronaut?

Date:

15 May 2005

Comments

hello, we are trying to learn about a 214 that we recently inherited. we have not been able to find any photos that are the same. the back states BULOVA 14KT GOLD PATENTED WATERPROOF and under the serial # it has M4, which we understand to mean it was manufactured in 1964. The front is round, there are raised rectangular gold markers on the 3, 6, & 9, with the emblem on the 12. there is a circle around the outside edge of the face plate (yet under the crystal) with minute markings and what appears to be a gold marking at each 5 min interval. the hands are gold color and the plate holds the name ACCUTRON in gold on a neutral color background. the band appears to be a leather KREISLER. we have not tried to set it, it hasn't been worn in years. would appreciate any information on the model, as well as any ideas of what it could be worth. thanks! gotaylor@aol.com

Date:

17 May 2005

Comments

Hello, I have a orangish face Bulova Accutron ladies watch, H594703, 10kt gold fill. Any idea if it worth anything? The 12 is also a fork. thanks, anut32002@yahoo.com

Date:

20 May 2005

Comments

Hi I'm curious - what is the significance in the number that is stamped on the "tuning forks" on a 1961 spaceview? Mine, prior to being refurbished, had a number 7 stamped on it. After being refurbed now has a 2? Any thoughts?
The repairer most likely had to swap the tuning fork in order to slow the movement. Installing a regulator diode is the preferred method. See the info at:  Accutron Batteries

Date:

22 May 2005

Comments

I came across a 14 kt gold Accutron with an unusual 14 kt gold watch band made up of links shaped like the tuning fork logo. While I am not certain, I believe it is one of the 218 models. The face has gold bars at each hour and a rectangular date box at 3 oclock. The exterior of the dial is dark brownish shading to gold in the center. Can anyone give me guidance as to what we have and how best to describe it? Is this watch unusual? Please answer via this board or email me at murph9677@earthlinnk.net. Thanks for any info! Tim Murphy

Date:

24 May 2005

Comments

I have a 218 Deep Sea Model, Swiss case #7525 with the inner bezel. I'm looking for a Deep Sea crown and a factory "bar" band to fit the watch. Please let me know. Thanks, Jim seaop1@qwest.net

Date:

28 May 2005

Comments

I have a accutron watch #D64356 it says 10K ROLLED GOLD PLATE BACK and 18K HEAVY GOLD ELECTROPLATE BEZEL on the back can you tell me what year this is and about how much its worth? Thank you any info would be appreciated. My email is tberryjuice@hotmail.com

Date:

29 May 2005

Comments

Date:

30 May 2005

Comments

I have a 1972 14kt accutron 218 watch I was wondering how much it is worth?? brucestillhere@stx.rr.com

Date:

05 Jun 2005

Comments

Folks: Any one have a reflector ring for a accutron 214 case #3031? Sometimes called the cushion or Anniversary watch. Thanks in Advance Bob at spamless@tampabay.rr.com

Date:

12 Jun 2005

Comments

Searching for ACCUTRON by Bulova 14k gold asymmetrical with white face, Roman numerals, crown at 4 PM circa 1969. The bezel is an embossed cross hatch like pattern in part with the left side rounded and the right side coming to a point at 3. contact oldgreenbay@comcast.net with your price. Thank you

Date:

13 Jun 2005

Comments

I have an Accutron and I am trying to determine exactly what it is. I believe it may be a stainless steel 218. The serial number is H998482. The date is N1. The tuning fork appears on the left side near the 9 o'clock position. The word Accutron appears immediately below the 12 o'clock position. The word Bulova does not appear on the face. It has a date but no day and a red face. There is what looks like a Roman numeral "II" at the 12, 6, and 9 positions, and a metallic square thingy at the 1,2,4,5,7,8,10 & 11 positions. Any help would be appreciated. My email address is hgcommunications@gmail.com

Date:

17 Jun 2005

Comments

I have a Bulova Accutron bought while I was in Vietnam (1969) The Battery is run out but a Jeweler told me the seal had leaked and there was rust inside. This is obviously a Old Watch but I would like to know about having it brought back up to original grade. Vietna467@aol.com

Date:

17 Jun 2005

Comments

Has anyone ever seen a 4-hand 218 Accutron? A 24 hour hand like the Astronaut, but in a 218 Railroad Accutron? The one I saw is dated N4.

Date:

18 Jun 2005

Comments

I have a Bulova M3 on the back of watch it says 10K RGP Bezel R3336528. inside the watch on the back has in black ink stamped 3199 23. Then engraved in back on top is 798TH. Then I have another one that says Bulova M4 on the back of the watch 10K RGP Bezel S95737. Inside the watch on the back has in black ink stamped 2575 124 . Then engraved in back on top and all over it has sets of numbers that have been scratched. I can make them out but not right know. please let me know if you have any more info about these watches. mtlbldng@aol.com 214-240-5925 Thanks, Erin Irby

Date:

04 Jul 2005

Comments

Wanted: Searching for Accutron 1. 218 from 2. 1969 circa that is 3. asymetrical 4. crown at 4 PM, 5. cross hatch pattern on bezel on top, bottom and left, 6. 14 kt. solid, 7. Roman numeral 8. white face, 9. rounded on left and pointed on right at 3 PM, 10. yellow gold. Thanks. oldgreenbay@comcast.net

Date:

09 Jul 2005

Comments

I HAVE AN ACCUTRON N2 STAINLESS STEEL SQUARE CASE. HAS MLVI ON THE FACE JUST LEFT OF THE HANDS. ACCUTRON BELOW 12 OCLOCK POSITION AND THE TUNING FORK SYMBOL ABOVE THE 6. I KNOW N2 DENOTES 1972. I NEED INFORMATION AS TO THE MODEL/STYLE MEANING OF THE ROMAN NUMERALS AND ANY OTHER INFORMATION. WMR54011@AOL.COM

Date:

12 Jul 2005

Comments

Hello, I`m looking for a Accutron 214 diamond dial with 4 or more diamonds and gold makers! Can you help! Tim Gerst FATPUDDIN@aol.com

Date:

25 Jul 2005

Comments

hello, I own a stainless steel 1975 anniversary spaceview bulova watch case#7581 It Keeps perfect time. I wonder if anyone Knows the value of this watch. Thank you, Ray. raygon3620@aol.com

Date:

02 Aug 2005

Comments

What type of battery do you use as a replacement in a 218 Accutron watch?

See the information at the bottom of the page at: http://www.accutron214.com/AccutronBattery.htm

Date:

08 Aug 2005

Comments

1980 Bulova Accutron, Armco badging, employee long service, mint condition. value

Date:

09 Aug 2005

Comments

Could anyone please help me identify and age my recently acquired Bulva Accutron #B44514? Thanks in advance. Also looking for a repair service in Canada. MickeyCoughran@Hotmail.com

Date:

16 Aug 2005

Comments

I believe I have a model 214 with a date code of M5. I live in Kansas and I am looking for a battery that is made for my watch. Please help in finding a location to pick one up.

Date:

18 Aug 2005

Comments

Need a bezel for a Bulova astronaut b circa 1970. New old stock or older good condition. Rantime rantime@webound.com

Date:

26 Aug 2005

Comments

I have a Bulova Accutron Quartz (dual-day. It was given to my Grandfather 30 years ago. Would like to know it history, worth, etc. It is gold in color, 10 kt R.G.P back. Please email: Deaniii@aol.com

Date:

09 Sep 2005

Comments

I have accutron serial # 667737 need the buckle and the pins . Please reply to gegy.yotov@gmail.com

Date:

10 Sep 2005

Comments

I have a 1968 214 Spaceview. Looking for a gold band for it. peter at ppv3@sbcglobal.net

Date:

02 Oct 2005

Comments

I have an Accutron Chamonix, the band is in real need of cleaning. I can not find a dealer that will touch it though. Does anyone know the best way to clean their bands and or a trustworthy company to clean it for me. Thanks! srounsefell@dollardays.com

Date:

08 Oct 2005

Comments

I have a ladies bulova w/17 jewels, tear dropped shaped 10k m6. i was looking for a good ballpark figure on how much its worth. i've been looking online for days and can't really find anything simuliar, if u know a price or maybe a good website to look for please let me know at niceguyjm7777@yahoo.com thank you for your time in advance. Sincerly Josh marsh

Date:

09 Oct 2005

Comments

I have a 69 (I think) Accutron. Clear face. Not the round one, not the square one, but the one in the middle. Round face with a curved corners body. It was my grandfathers. I'm looking for the original band. Please let me know where I can find one. E-mail me at adamlorber1@mac.com. I believe I need an 18mm or a 20mm band...anyone know which one? Thanks!

Date:

12 Oct 2005

Comments

I found a watch. Trying to find out about it. It is a bulova looks like m4 on the back.10 k bezel. and this number X 235411 ALSO IT HAS A CHAIN LOCK ON BAND . IT ALSO LOOKS LIKE DIAMONDS ON FRONT. BUT IT IS SO DIRTY. CAN`T TELL, CAN SOMEONE HELP.

Date:

24 Oct 2005

Comments

Hi, I have a Bulova 3063-5020. It is 18kt gold with one diamond at the twelve. I need to know how much it is worth. Can you help? Thanks in advance. steve746@hotmail.com

Date:

24 Oct 2005

Comments

Hi, I have a Bulova Accutron Quartz Open Face Pocket Watch. It has a gold back, off white face black roman numbers, and a second hand. There is a tuning fork on the crown. Can anyone tell me to as to when this watch was made and what the value might be? It is currently keeping excellent time. Thanks, BasNir@aol.com

Date:

26 Oct 2005

Comments

I have an accutron 218 that the face is mis-alligned the 12 is approximately in the 1 position. can you tell me what is wrong as these are held in allign with the stem. I know you only work on 214's , is there someone who works on 218's? any help you can give would be appreciated. thanks in advance, Mike

Date:

27 Oct 2005

Comments

My Accutron 1966, M6 serial # a65009, is stoping just before midnight. I have to turn it past midnight. I believe the date movement is stoping the watch. Battery I believe is fresh, about a year old. thanks for your help.

Date:

27 Oct 2005

Comments

Hello, I have a Accutron 218 and in need of a new retainer ring (BR-7). Anyone with one for sale please contact me: bapawn@valornet.com Thanks, AC Meek

Date:

28 Oct 2005

Comments

I have an Accutron bought in South Africa in the early 70's. Unfortunately no longer running. Any information on a reputable repairer in the UK, even better if in Scotland, would be welcomed. ilpeebles@hotmail.com

Date:

03 Nov 2005

Comments

My two 25 yr old accutron railroad 214's lose about 3 seconds a day with new Walmart 394 batterys.....what should i do wa0jum@aol.com

Date:

22 Nov 2005

Comments

Hello, I recently picked up a Spaceview 214 M5 but I know nothing about it; how can I tell if it has been modified to use a modern battery? There was no battery inside when I bought it. Also what is the purpose of the plastic spacer on the battery? I (briefly) tried a 394 to verify that it works, it did not appear that any spacer would be necessary. Thanks much for your time. Fred Jaggi slagfan@pobox.com

Date:

02 Dec 2005

Comments

Hi! I’m looking four a bezel for my Accuton Deep sea 666 feet, if you have one please contact me. adamxe@hotmail.com Many thanks Adam

Date:

04 Dec 2005

Comments

BULOVA ACCUTRON SPACEVIEW - i've had it since I was 21 <bought it in 1970/71>- 14 K, benzel - missing the original band - it has worked off & on over the years - can you tell me what it would cost to repair ,yes it needs a new crystal & the original lug band. > and it's worth? thank you. Arnie Newman arnold.newman@att.net

Date:

05 Dec 2005

Comments

I have a Bulova Accutron ladies watch bought in 1973. It has a brown and orange striped face. The movement has failed and I would like to know if it's possible to repair this under my local jeweller's estimated cost of £250-300. stardust@priory629.fsnet.co.uk

Date:

14 Dec 2005

Comments

I have an Accutron Bulova 1971 D watch with steel band - with out the day/date feature - blue face - there is one on this website in the vintage ad section. The 'have you caught your watch making advances?" ad. Is this rare ? Any idea what it is worth? - The only info i can find on it is this ad - my email is :janla@sbcglobal.net

Date:

21 Dec 2005

Comments

i am interested in purchasing a spaceview model 214 14ct gold. please email me at jamie409@aol.com thanks

Date:

21 Dec 2005

Comments

Anyone know of a certified Accutron service agent in New York City who can replace the battery on my 1970s Accutron Diver (2 Crowns, inner bezel) kayvan007@hotmail.com

Date:

24 Dec 2005

Comments

I have a accutron bulova m4 watch railroad approved watch i would like info and estimated value please if you could respond. fighter41129@aol.com

Date:

26 Dec 2005

Comments

I have an Accutron Astronaut M6 and have lost the outer "24 hour knurled ring". The finish is stainless steel and I would greatly appreciate information on where I might find and purchase a replacement for this part. Contact me via email at "advantagefire@fullnet.com

Date:

28 Dec 2005

Comments

Hi to all our friends in the US. I am an Accutron collector in the United Kingdom. I have read somewhere that these tuning fork watches were made in the US and in Switzerland and that it is possible to establish where by the serial number. Any information will be appreciated. John

See the information at: http://www.accutron214.com/AccutronQ&A.htm#serial number