TUNING FORK WATCHES ONLY
HOME Site Map
ARCHIVES
2002 2003 2004 2005 2006 2007 2008 2009 2010
The 2010
Accutron 214
Bulletin Board
TUNING FORK
WATCHES ONLY
HOME
Site Map
ARCHIVES
2002
2003
2004
2005
2006
2007
2008
2009
2010
Your comments will appear within 24 hours. Please do not enter your message more than once.
This page will be edited using the following
criteria:
1. Tuning fork driven Accutrons
only
2. If asking for information, you must provide an e-mail address
3. Please, no shouting. IF
YOU USE ALL CAPITAL LETTERS IT WILL LOOK LIKE THIS
4.
No "For Sale" adds on this page,
Please
Go
Here
5.
Please keep your message brief
Click this link to scroll down to
the latest comments: VIEW
LATEST COMMENT
Please remember that this is a public forum. If you wish to contact me privately, please do so via e-mail.
January 11, 2010
i love my watch it's an acutron automatc it's a m6 can you send some info on it email is coeper057@aol.com
January 20, 2010
My deceased brother-in-law left an Accutron watch with no band, not running. It looks like the 214's in this website. It is a 10K gold filled bezel with serial number D88781 and what looks like an N1 below the serial number. Can anyone tell me what this is for sure, year made, and approximate value. Thanks Mark mtowner@earthlink.net
February 20, 2010
Hi, I've just purchased an Anniversary 214 spaceview in new condition with original inner box, I've found an outer box and coin, I just need an original user guide in very good/new condition to make it complete for my collection, I'm in the UK dennismuk@hotmail.com
February 21, 2010
I have inherited a Spaceview sn K93447 / M4, and after looking at several sites this watch appears to be 100% original and in 98% condition, except for the non-Accutron leather strap. The watch is absolutely not for sale but I would like to find out more about it, and perhaps a current value for insurance purposes, if that be warranted. I can send scans to whomever wishes to help me. Thank you, Mrs. I.L. Wagner - choctaw_cat@mindspring.com
March 18, 2010
Hi, i wonder, could someone tell me where the shimming washer resides on the 214 calibre movement? what does it shim? many thanks-gary. gary.cbr900@ntlworld.com
March 23, 2010
Can someone tell me how to remove the Crown from my 218D Accutron? The movement does not work, and I have another movement that I want to put in it. Thanks Reply to Fenwick11@aol.com
April 03, 2010
What is, or was the best ladies Acutron made with a tuning fork? chathaway1@tampabay.rr.com and what model of men's had the day & date?
April 17, 2010
I have a Bulova Accutron watch that was my father-in-laws. I've search hours on the internet for any kind of picture or information on this watch with absolutly no luck. Any information would be greatly appreciated. The only thing I can tell you is that it has a stainless steel flexible band and the numbers on the back of the case are H882513 and an N1. The only info I have found is the N1 can possibly mean that it's from 1971. Email is babilek@att.net Thanks in advance!!!
April 24, 2010
i have an N3 accutron with outer # 0-11 and inner # 12-23. i believe its a 218-0 model. its working excellent. how valueable would it be. email me. allanboudreau@hotmail.com.
April 30, 2010
I lost an accutron and want to replace it, but I do not know the model number. Perhaps a description will help someone help me. The watch was given to me as a gift in 1967. It was not a Spaceview. It had a pillow shaped 18K gold filled case. It had a dial which had a portal for the day of the month that could be advanced by a stem that protruded from the case. I can be contacted at: jmmaster@optonline.net
April 30, 2010
I lost an accutron and want to replace it, but I do not know the model number. Perhaps a description will help someone help me. The watch was given to me as a gift in 1967. It was not a Spaceview. It had a pillow shaped 18K gold filled case. It had a dial which had a portal for the day of the month that could be advanced by a stem that protruded from the case. I can be contacted at: jmmaster@optonline.net
June 09, 2010
i have a Bulova accutron railroad approved watch. I'm aware that it is a swiss model as i have the swiss serial number stamped on the back. on the back its stamped M7 and around the outer circle it says bulova waterproof patented stainless steel. the face is round and white, with blue 24 hour counters. the numbers seem raised above the 24 hour markers in black. there is a tuning fork embelem in the centre at the top where '12' should be. the text on the face says bulova accutron railroad approved. i have found it really difficult to research online and there are suggestions that this model is rare ?? please help!! any information would be greatly appreciated ! debbieanderson1980@hotmail.co.uk
June 19, 2010
I'm trying to purchase a Bulova Accutron Spaceview M6 with a genuine black leather band. It's imperative that the face does NOT contain the white dots that mark each hour. In addition, the watch must be in "like-new" condition and costs under $350. If anyone is interested in selling such a watch OR can provide ANY helpful information/sites, please email me at jsgiller@hotmail.com or call 404-641-8911 (ask for Jared). Thanks
July 07, 2010
I'd like to identify and date my late father's watch. It has "Accutron" between the hub and XII, and the tuning fork logo between hub and VI. It has a cream face, and a slim flat gold case with gold Roman numerals and the winder is at IIII position. Diameter of watch case is 33mm. Between V and VII is "Swiss Made 27A04" printed around the edge of the face. The back has the number 503650 on it, but no apparent date code. Any help would be appreciated. rod@dugganaudio.co.uk
July 14, 2010
I have an M7 accutron man's watch, serial number B90830. I am fairly certain it is a 214 and it is 10kt. gold filled bezel. It has Roman Numeral on the face with the tuning fork logo in the 12 o'clock position. I am interested in obtaining an estimate price. Can you assist? Thanks! I can be reached at
dennis@daltonaffiliates.com
July 19, 2010
Hello, I recently purchased an 214, but it's one like ive never seen before. It's asymmetricical (with the two gold swishes on either end of the "football"), but it's a Railroad approved watch. I've never seen anyone like this before and I'm wondering if it's a watch that was just thrown together (Parts), or if it's factory designed. Any information would be great! Thanks in advance, Gavin gavinvl@optonline.net
If asking for information, you must provide an e-mail address
ARCHIVES
2002
2003
2004
2005
2006
2007
2008
2009
2010
Home
|
Accutron Repair
& Restoration | Custom
Dials | The Workshop | 214's
For Sale | Bands
For Sale | Parts &
Accessories
Accutron History |
Spaceview
History | Photo
Gallery | Luminous Gallery | Vintage Ad Gallery | Clock
Gallery | Band
Gallery
F.A.Q. | Accutron
Problems | Batteries | Booklets |
Message
Board | For
Sale By Owner | Feedback |
Contact
Information
|
Lost/Stolen